Macrium Reflect FREE Edition / viBoot v. 7.2.x - Imagebackup und -restore im TrueImage-Stil

Programme, um Daten zu sichern und gelöschte Daten wiederherzustellen

Moderatoren: Jean, |Gordon|, Moderatoren

Benutzeravatar
Gordon
Beiträge: 13156
Registriert: 06.01.02, 18:46

Re: Macrium Reflect FREE Edition / viBoot v. 6.3.x - Imagebackup und -restore im TrueImage-Stil

Beitrag von Gordon » 06.06.17, 19:29

Bug Fixes 6.3.1813 - 5th June 2017

Program crash when retention rules deletes several hundred split files
A program error could occur when several hundred split image files are deleted during retention rule deletion. This has been resolved.
Program crash when re-loading the disk layout view after a clone
Some customers have experienced a program error post cloning. This has been resolved.
Various bug fixes
Additional unspecified bug fixes are included in this release.
Freude ist nur ein Mangel an Information.

Jean
Beiträge: 11431
Registriert: 30.10.01, 12:41

Re: Macrium Reflect FREE Edition / viBoot v. 6.3.x - Imagebackup und -restore im TrueImage-Stil

Beitrag von Jean » 29.09.17, 2:31

v. 7.1.2602 - jetzt auch kommerziell nutzbar
Now licensed for commercial as well as personal use
Improved auto verification speed
Additional Scheduled task conditions
New backup engine
Virtual Image Boot
Windows 10 Task Scheduler compatibility
...

Benutzeravatar
klodeckel
Mitglied
Beiträge: 4875
Registriert: 13.05.12, 10:16

Re: Macrium Reflect FREE Edition / viBoot v. 7.1.x - Imagebackup und -restore im TrueImage-Stil

Beitrag von klodeckel » 18.03.18, 17:20

Ein häufiger Fehler den Leute machen, wenn sie etwas völlig Narrensicheres erfinden wollen, ist den Einfallsreichtum kompletter Narren zu unterschätzen.

Benutzeravatar
klodeckel
Mitglied
Beiträge: 4875
Registriert: 13.05.12, 10:16

Re: Macrium Reflect FREE Edition / viBoot v. 7.1.x - Imagebackup und -restore im TrueImage-Stil

Beitrag von klodeckel » 18.04.18, 8:07

v7.1.3147 - 17th April 2018

Macrium Image Guardian
The Macrium Image Guardian system components have been updated to provide enhanced performance and reliability.
Backup definition encryption state change mid backup set
Macrium Reflect will now start a new backup set if the encryption settings in a Backup Definition is changed.
Bug Fixes

Technicians Portable USB Add Drivers
The Add Drivers Wizard in the technicians portable USB stick could fail to detect the correct version of Windows PE when reporting supported devices. This has been resolved
File and Folder Restore toast notifications
When restoring File and Folder backups, incorrect toast notifications could be displayed. This has been resolved
SQL backup error if the Computer DNS name is greater than 15 characters
For SQL backup, if the default SQL instance name was used and the Computer DNS name didn't match the Computer NetBios name then the backup could fail. This has been resolved
ReflectMonitor
Pressing the 'Escape' key while viewing ReflectMonitor would cause termination of the ReflectMonitor session. This would cause a delay when restarting and possible loss of log data in the monitor Window. This has been resolved
Various
Various bug fixes and changes to improve Macrium Reflect.
Ein häufiger Fehler den Leute machen, wenn sie etwas völlig Narrensicheres erfinden wollen, ist den Einfallsreichtum kompletter Narren zu unterschätzen.

Jean
Beiträge: 11431
Registriert: 30.10.01, 12:41

Re: Macrium Reflect FREE Edition / viBoot v. 7.1.x - Imagebackup und -restore im TrueImage-Stil

Beitrag von Jean » 04.05.18, 0:45

Obacht!
v. 7.1.3196 - Incremental & Differential Image Corruption
Incremental and Differential images created since 17th April using Macrium Reflect v7.1.3147, 3159 or 3169 could be corrupt if the Changed Block Tracker (CBT) driver was involved in the Image creation.
This has been resolved.

Jean
Beiträge: 11431
Registriert: 30.10.01, 12:41

Re: Macrium Reflect FREE Edition / viBoot v. 7.1.x - Imagebackup und -restore im TrueImage-Stil

Beitrag von Jean » 04.07.18, 2:15

v. 7.1.3307 - weniger Fehler, u.a.
SQL Backup failure if TLS 1.0 is disabled

Benutzeravatar
klodeckel
Mitglied
Beiträge: 4875
Registriert: 13.05.12, 10:16

Re: Macrium Reflect FREE Edition / viBoot v. 7.2 - Imagebackup und -restore im TrueImage-Stil

Beitrag von klodeckel » 31.10.18, 7:13

Ein häufiger Fehler den Leute machen, wenn sie etwas völlig Narrensicheres erfinden wollen, ist den Einfallsreichtum kompletter Narren zu unterschätzen.

Benutzeravatar
blackcrack
Mitglied
Beiträge: 691
Registriert: 28.10.09, 3:08

Re: Macrium Reflect FREE Edition / viBoot v7.2.3811 - Imagebackup und -restore im TrueImage-Stil

Beitrag von blackcrack » 31.10.18, 8:51

v7.2.3811_reflect_setup_free_x64.exe

Durch den downloadhelper
https://www.macrium.com/reflectfree

Ihr müsst keine EMailadresse angeben, einfach continue drücken..
(ich weis, ich hass die werbung auch in der mail)
liebe Grüße
Blacky
=> Blubb (ich hoff das stört cheffe ned !) Blobb <=

Benutzeravatar
klodeckel
Mitglied
Beiträge: 4875
Registriert: 13.05.12, 10:16

Re: Macrium Reflect FREE Edition / viBoot v. 7.2.3825 - Imagebackup und -restore im TrueImage-Stil

Beitrag von klodeckel » 03.11.18, 7:41

v7.2.3825 - 2nd November 2018

Extended Windows Shutdown Times
Some customers have experienced extended Windows shutdown times and have been unable to perform a safe Removal of USB storage devices when the Macrium Changed Block Tracker (CBT) driver is installed. This has been resolved.
Note: This patch will require a reboot. The initial reboot will still be using the previous CBT driver, so may take an extended amount of time to shutdown. The new CBT driver will be active after the initial reboot.
Windows XP/Vista/7 Scheduled Tasks Exit Code
Scheduled backups on Windows XP/Vista/7 could complete with code 0xff. Tasks would complete successfully but error as the application was unloading. This has been resolved.
Ein häufiger Fehler den Leute machen, wenn sie etwas völlig Narrensicheres erfinden wollen, ist den Einfallsreichtum kompletter Narren zu unterschätzen.

Benutzeravatar
blackcrack
Mitglied
Beiträge: 691
Registriert: 28.10.09, 3:08

Re: Macrium Reflect FREE Edition / viBoot v. 7.2.x - Imagebackup und -restore im TrueImage-Stil

Beitrag von blackcrack » 12.11.18, 16:01

Macrium Reflect v7.2.3858

--------------------------------------------------------------------------------
Date 12th November 2018

Bug Fixes v7.2.3858 - 12th November 2018

Note: This patch will require a Windows reboot.
  • Explorer Crash Some customers have experienced a Windows Explorer crash if displaying the 'Backup Method' column when exploring folders containing Image files. This has been resolved.
  • Wi-Fi Drivers copied for Windows PE Windows PE could incorrectly load Windows RE Wi-Fi drivers at start-up and stall the boot sequence. This has been resolved. If this issue affects you then please create fresh Windows PE rescue media after updating.
  • Rescue Media Builder RMBuilder.exe could crash if invalid/non-writable media was inserted when burning optical rescue media. This has been resolved.
  • Rescue Media Builder The Windows volume manager could cause a delay when a partition was created on USB media causing the media creation to fail. This has been resolved.
  • Backup Start Dialog The delay time selected when a schedule backup starts was not being honoured. This has been resolved.
  • Backup Failure Emails When upgrading pre-7.2 backup definitions, the option to include/exclude 'Cancelled' backups from failure emails was not saved. This has been resolved.
  • Windows PE 5.0 Windows PE 5.0 rescue media would incorrectly show 'PE 4.0' in the application title bar. This has been resolved.
  • Windows XP System Tray Icon When running scheduled backups on Windows XP the Reflect Monitor system tray icon could be hidden. This has been resolved.
  • MIG Notifications Macrium Image Guardian could show an incorrect blocking notification for ReflectBin.exe. This has been resolved.
  • Server Plus SQL backups Macrium Image Guardian could block Server Plus backups of SQL databases. This has been resolved.
  • ShadowProtect incompatibility with CBT Some customers have reported a Windows BSOD if StorageCraft ShadowProtect was installed. This has been resolved.
=> Blubb (ich hoff das stört cheffe ned !) Blobb <=

Benutzeravatar
blackcrack
Mitglied
Beiträge: 691
Registriert: 28.10.09, 3:08

Re: Macrium Reflect FREE Edition / viBoot v. 7.2.x - Imagebackup und -restore im TrueImage-Stil

Beitrag von blackcrack » 27.11.18, 12:19

Macrium Software
‏ @MacriumReflect
18 Std.Vor 18 Stunden

Macrium Reflect v7.2.3897 is available now! :drink:
http://updates.macrium.com/reflect/v7/v ... 2.3897.htm

What's New v7.2.3897 - 26th November 2018
Note: This patch will require a Windows reboot.
  • SMB 1.0 Support
    We've added a check-box to re-enable legacy SMB 1.0 support in Windows RE and PE 10 version 1709 or greater..
Bug Fixes
  • Backup Completion Email
    Backup completion emails could fail to send if the senders email was specified using the 'friendly name <user@domain.com>' format. This has been resolved.
  • Rescue Media Builder
    The following issues have been resolved...
    An application error could occur if Windows RE couldn't fit on CD media.
    Old ISO files were not being deleted before creating new CD/DVD rescue media.
    External USB volume format failure.
    PE 10 rescue media would incorrectly show PE 5.0 in the Reflect application title bar
    SRT drivers were not being injected into the WIM when building rescue media.
  • One Drive update failure
    Macrium Service would lock OneDrive.exe and prevent Windows Update from updating the OneDrive service. This has been resolved.
  • Macrium Image Guardian (MIG)
    The following issues have been resolved...
    MIG would fail to detect that a Robocopy operation was accessing a backup target when Reflect was configured to use the unique volume identifier to locate backup drives.
    MIG could cause some Anti-Virus software to hang when inserting USB flash drives.
  • Macrium Changed Block Tracker (MRCBT)
    The following issues have been resolved...
    A BSoD could occur after removal of a USB attached storage device.
    CBT would incorrectly attach to devices flagged as having removable media.
    A BSoD could occur if a user-mode application attempted to read an offline NTFS volume.
    CBT could block formatting of some NTFS volumes, causing the format command to stall at 99%.
https://www.macrium.com/reflectfree
=> Blubb (ich hoff das stört cheffe ned !) Blobb <=

Benutzeravatar
blackcrack
Mitglied
Beiträge: 691
Registriert: 28.10.09, 3:08

Re: Macrium Reflect FREE Edition / viBoot v. 7.2.x - Imagebackup und -restore im TrueImage-Stil

Beitrag von blackcrack » 30.11.18, 16:59

und da Macrium Software grad beim updaten iss :

--------------------------------------------------------------------------------
Date 30th November 2018

Macrium Reflect v7.2.3906 is available now! Bild
http://updates.macrium.com/reflect/v7/v ... 2.3906.htm

Bug Fixes v7.2.3906 - 29th November 2018
  • ISO File Creation Failure
    RMBuilder could fail to create ISO image files. This has been resolved.
  • Macrium Image Guardian (MIG)
    MIG could incorrectly display a blocking notification during consolidation when the consolidation target folder was a protected network share. This has been resolved.
  • Various
    Various bug fixes and changes to improve Macrium Reflect.

Bild https://www.macrium.com/reflectfree
=> Blubb (ich hoff das stört cheffe ned !) Blobb <=


Benutzeravatar
blackcrack
Mitglied
Beiträge: 691
Registriert: 28.10.09, 3:08

Re: Macrium Reflect FREE Edition / viBoot v. 7.2.x - Imagebackup und -restore im TrueImage-Stil

Beitrag von blackcrack » 21.12.18, 14:01

Macrium Reflect v7.2.3957

--------------------------------------------------------------------------------
Date 21st December 2018

Bug Fixes v7.2.3957 - 21st December 2018

Macrium Changed Block Tracker (MRCBT)
Some customers have experienced a Windows system exception causing a BSoD if the CBT feature was installed with v7.2.3954. This has been resolved.

hahh war schneller :)
=> Blubb (ich hoff das stört cheffe ned !) Blobb <=

Benutzeravatar
klodeckel
Mitglied
Beiträge: 4875
Registriert: 13.05.12, 10:16

Re: Macrium Reflect FREE Edition / viBoot v. 7.2.x - Imagebackup und -restore im TrueImage-Stil

Beitrag von klodeckel » 19.02.19, 15:42

Macrium Reflect v7.2.4063 - 18th February 2019

umfangreiches Änderungsprotokoll gibt's hier:http://updates.macrium.com/reflect/v7/v ... 2.4063.htm
Ein häufiger Fehler den Leute machen, wenn sie etwas völlig Narrensicheres erfinden wollen, ist den Einfallsreichtum kompletter Narren zu unterschätzen.

Jean
Beiträge: 11431
Registriert: 30.10.01, 12:41

Re: Macrium Reflect FREE Edition / viBoot v. 7.2.x - Imagebackup und -restore im TrueImage-Stil

Beitrag von Jean » 04.04.19, 0:43

v. 7.2.4156 - weniger Fehler
Large NTFS Cluster Sizes
Macrium Reflect now includes support for volumes formatted with the NTFS file-system that have a cluster size larger than 64K.

Jean
Beiträge: 11431
Registriert: 30.10.01, 12:41

Re: Macrium Reflect FREE Edition / viBoot v. 7.2.x - Imagebackup und -restore im TrueImage-Stil

Beitrag von Jean » 22.04.19, 0:17

v. 7.2.4228
Image file loading speed improvement - Reduced the time taken for Reflect to read the indexes back from the previous files in the backup set.

Benutzeravatar
blackcrack
Mitglied
Beiträge: 691
Registriert: 28.10.09, 3:08

Re: Macrium Reflect FREE Edition / viBoot v. 7.2.x - Imagebackup und -restore im TrueImage-Stil

Beitrag von blackcrack » 22.04.19, 10:39

Macrium Reflect v7.2.4228
--------------------------------------------------------------------------------
Date 21st April 2019

What's New v7.2.4228 - 21st April 2019
  • Image file loading speed improvement
    Reduced the time taken for Reflect to read the indexes back from the previous files in the backup set. This is most noticeable when reading a large number of remote files.
Bug Fixes
  • Change Block Tracker
    • Fixed an issue where a TRIM operation on a Registry hive would cause a dead-lock if some third-party software was holding a lock on the Registry.
    • Fixed an issue where CBT could not be enabled on some volumes if the list of file extents for the NTFS $LogFile spanned a 512 byte boundary.
  • Image Guardian
    • Fixed an issue on some Windows 7 systems, where MIG was prevented from using the Microsoft cryptographic functions.
    • MIG could block the creation of SQL backups. This has been resolved.
  • viBoot
    Creating an Incremental image of an encrypted/password protected image would fail with invalid password. This has been resolved
=> Blubb (ich hoff das stört cheffe ned !) Blobb <=

Benutzeravatar
blackcrack
Mitglied
Beiträge: 691
Registriert: 28.10.09, 3:08

Re: Macrium Reflect FREE Edition / viBoot v. 7.2.x - Imagebackup und -restore im TrueImage-Stil

Beitrag von blackcrack » 10.06.19, 17:35

Macrium Reflect v7.2.4325

--------------------------------------------------------------------------------
Date 10th June 2019

What's New v7.2.4325 - 10th June 2019
  • Macrium Technicians License
    We've improved the Technicians license product by adding the option to create a Technicians ISO image file and optical media. This offers the full functionality of the Technicians USB stick but also allows you to use it with Hyper-V VMs by attaching the ISO file to a DVD virtual device.
  • Clone and Restore Confirmation
    We've added an additional confirmation check box when overwriting a Clone or Restore target disk. This offers Reflect users unfamiliar with the result of a Restore/Clone operation the opportunity to confirm or deny the overwrite operation.
  • ReDeploy
    When attempting to ReDeploy Windows 7 using PE/RE 10 or Windows 10 using PE/RE 3.1 we now prevent IDE/ACHI services and drivers from being copied from the rescue media. This has caused un-bootable systems for some customers previously.
  • Rescue media USB drivers
    Some customers have reported non-functioning USB devices which was corrected by updating the USB drivers in PE. Rescue media creation will now copy any USB OEM drivers from the host OS even if 'compatible' support is detected in the PE/RE base OS.
  • Changed Block Tracker
    • The CBT tracking file format has been optimized and improved for efficiency and robustness. This will require a reboot after installing and the first Incremental after reboot may take longer than normal.
    • CBT and Reflect now ignore the PortableBaseLayer virtual disk used by the Sandbox feature in Windows 10 build 1903.
  • Uninstall tidy up
    Unused .msi files in folder c:\windows\installer are now removed when uninstalling Macrium Reflect.
    File and Folder Search
    We've added path matching to the search criteria when searching File And Folder backups in the restore tab. Previously this was restricted to file names only.

    Bug Fixes
  • Image mounting
    In rare cases images could refuse to mount if insufficient access privileges were assigned to the 'C:\Windows\Temp' folder. This has been resolved.
  • Incorrect information in the Disk Details UI
    Directly after starting Reflect, incorrect information was shown in the 'Details' section of the Tasks list in the backup tab. This has been resolved.

    Rescue Media Builder
    • After uninstalling Reflect, the windows module 'Wimmount.sys' could be incorrectly registered leaving other applications unable to mount VHD files. This has been resolved
      Windows RE could fail to build on Server 2016. This has been resolved
    • BitLocker
      BitLocker 'live' restores may have reverted to BitLocker 'removal' restores after the last update. This has been resolved. If this issue affects you then please re-create your rescue media after updating.
    Changed Block Tracker
    CBT could be disabled for a volume after a reboot forced by running 'chkdsk /f'. This has been resolved.
Server Plus Only - What's New v7.2.4230 - 22nd April 2019

Bug Fixes

Image Guardian

MIG could block the creation of SQL backups. This has been resolved.
=> Blubb (ich hoff das stört cheffe ned !) Blobb <=

Jean
Beiträge: 11431
Registriert: 30.10.01, 12:41

Re: Macrium Reflect FREE Edition / viBoot v. 7.2.x - Imagebackup und -restore im TrueImage-Stil

Beitrag von Jean » 02.08.19, 23:44

v. 7.2.4398 - weniger Fehler
Microsoft Exchange 2019 - Support has been added for Microsoft Exchange 2019 for backup, restore and granular restore.
Update to TLS 1.2 - The email option in Macrium Reflect has been updated to include TLS 1.2 support.
Rescue Media Files - The driver folders for WinPE/WinRE have been expanded to support multiple architectures and WIM versions.

Antworten