Windows Firewall Control v. 6.0x

Firewalls, Proxytools und netzwerkrelevante Programme im Zusammenhang mit Security

Moderatoren: |Gordon|, Jean, Moderatoren

Benutzeravatar
Distman
Mitglied
Beiträge: 114
Registriert: 22.12.03, 10:48

Windows Firewall Control v. 6.0x

Beitrag von Distman » 03.05.13, 7:32

Name: Windows Firewall Control
Version: 3.9.1.8
Größe: 496 KB
Homepage: http://www.binisoft.org/wfc.php
Supportforum: http://www.binisoft.org/forum/index.php und/oder http://www.wilderssecurity.com/showthread.php?t=293143
Lizenz:
Screenshot: auf der Homepage
Admin-Rechte nötig?:
portabel / abhängig von: Microsoft .NET Framework version 4.0, Windows Firewall service, DNS Client service
Lauffähig ab (Win95, 2000, XP): alle 32bit und 64bit Versionen von Windows 8, Windows 7, Windows Vista, Windows Server 2008. Kein XP
Nativ x64?: durch .NET

Beschreibung: Dieses Frontend für die Windows Firewall konnte ich noch nicht hier finden. Falls es doch schon existiert, bitte zusammenführen. Es ist nur eine Oberfläche für die eingebaute Firewall. Nach einer Spende von 10$ kann man noch ein paar Funktionen mehr freischalten.

Gefallen hat mir, dass sie auch unter Windows 8 gut läuft. Es gibt Sprachdateien. Wird auch aktiv entwickelt. Der Entwickler hat eine Version 4 angekündigt die einfacher sein soll.

Eine genauere Beschreibung des Programms und der Möglichkeiten gibt es auf der Homepage.
Zuletzt geändert von Distman am 26.08.14, 7:30, insgesamt 1-mal geändert.

Doppeldecker
Mitglied
Beiträge: 27
Registriert: 21.02.07, 17:26

Re: Windows Firewall Control

Beitrag von Doppeldecker » 03.05.13, 10:38

Sorry, ist leider keine _komplette_ Freeware.

Auszug aus der Homepage:

Registered Users Features (Read here how to become a registered user)
√ Learning Mode which provides notifications for outgoing blocked connections. Four modes are available:
High - Display notifications for all outgoing connections that were blocked by Windows Firewall, including System and Svchost.exe.
Medium - Display notifications only for regular programs, without notifications for System and Svchost.exe.
Low - Automatically allow digitally signed programs without notifications, but show notifications for unsigned programs.
Disabled - Notifications are disabled.


In der Freeware-Version schon sehr zu empfehlen.
In der Vollversion (10$, für unlimitierte Anzahl von Lifetime-Lizenzen) ein absolutes Highlight.
Gerade, da es die Herrschaften der MS-Fraktion es noch nicht geschafft haben, so etwas zu implementieren.

Gruß
Ich hasse Signaturen

Benutzeravatar
blackcrack
Mitglied
Beiträge: 650
Registriert: 28.10.09, 3:08

Re: Windows Firewall Control

Beitrag von blackcrack » 03.05.13, 17:49

dann sollte man doch mal reactos.org bescheit sagen, daß sowas auf die todo liste soll..
wer english kann, kann das im englishen forum recht effectiv vor bringen.
liebe Grüße
Blacky
=> Blubb (ich hoff das stört cheffe ned !) Blobb <=

Benutzeravatar
Distman
Mitglied
Beiträge: 114
Registriert: 22.12.03, 10:48

Re: Windows Firewall Control

Beitrag von Distman » 24.05.13, 10:16

Hat eine neue Oberfläche bekommen und hat Versionsnummer 4.0.0.2

http://www.binisoft.org/wfc.php

Hier der neue Support Thread: http://www.wilderssecurity.com/showthread.php?t=347370

BlackFly
Mitglied
Beiträge: 69
Registriert: 15.10.05, 3:23

Re: Windows Firewall Control v. 4.0.0.2

Beitrag von BlackFly » 12.11.13, 19:31

Aktuell 4.0.3.0
Der komplette Changelog

BlackFly
Mitglied
Beiträge: 69
Registriert: 15.10.05, 3:23

Re: Windows Firewall Control v. 4.0.3.0

Beitrag von BlackFly » 02.03.14, 14:08


BlackFly
Mitglied
Beiträge: 69
Registriert: 15.10.05, 3:23

Re: Windows Firewall Control v. 4.0.8.0

Beitrag von BlackFly » 12.03.14, 21:17

4.0.8.2
Changelog

BlackFly
Mitglied
Beiträge: 69
Registriert: 15.10.05, 3:23

Re: Windows Firewall Control v. 4.0.8.2

Beitrag von BlackFly » 15.03.14, 11:52

Aktuell 4.0.8.4
What's new in version 4.0.8.4 (15.03.2014)

- Fixed: Disabling the logging from the uninstall dialog applies only for the blocked
connections. The allowed connections are still logged after WFC uninstallation.
- Fixed: The icon does not appear in the system tray area if the connection to the
service can not be established.
- Fixed: When creating a rule without customizing it from "Connections Log" or
"New Rules Wizard" the direction of a rule that is set in the Main Panel is not
applied correctly. Only outbound rules are created.
- Fixed: The icon does not appear in the system tray area at program startup if the
user has defined a custom notification sound.
- Improved: The logging was updated to identify more easily the problems that may
appear during the program execution.

BlackFly
Mitglied
Beiträge: 69
Registriert: 15.10.05, 3:23

Re: Windows Firewall Control v. 4.0.8.4

Beitrag von BlackFly » 22.03.14, 8:52

4.0.8.6
What's new in version 4.0.8.6 (20.03.2014)

- Fixed: The updater hangs if the user executes it from a standard user account and
the program is running in system tray. The workaround was to manually close it first
from the system tray icon and then execute the updater. Now, the update will complete
even if the user does not close first the existing running instance.
- Fixed: The protocol is always set to TCP if the user modifies a rule from the
notification dialog and the protocol is set to ANY.
- Fixed: The Manage Rules window remains always on top after creating a new rule
from the options available on the right panel named "Create new rule". The same
behavior was also identified and fixed for the Main Panel window.
- Fixed: After a clean installation the default notification level is set to Low
level instead of Disabled level.
- New: The log of the installation/update can be now viewed if the user presses
the F12 key when the installation/update is complete (the EXIT button appears).

Jean
Beiträge: 11444
Registriert: 30.10.01, 12:41

Re: Windows Firewall Control v. 4.0.8.6

Beitrag von Jean » 04.05.14, 23:40

v. 4.0.9.0 - weniger Fehler und
- New: Install Mode. This new mode available in the Profiles tab will automatically revert a chosen profile after a given period of time

vap.coder
Mitglied
Beiträge: 86
Registriert: 04.04.05, 1:02

Re: Windows Firewall Control v. 4.0.9.0

Beitrag von vap.coder » 19.05.14, 12:40

v. 4.0.9.2

Info: Vorherige Versionen müssen deinstalliert werden.

- Fixed: AppGuard and Steam can still create firewall rules at boot time when their
services start before WFC. Now, the WFC service initializes first and intercepts
properly these attempts.
- Fixed: The profile is not reverted by the Install Mode if the system is restarted.
- Fixed: Install Mode can change a higher profile to a lower profile which should not
be possible. The description of Install Mode was renamed and the profiles available
were reduced only to High Filtering and Medium Filtering profiles.
- Fixed: When switching between multiple connections in notification dialog, the
Protocol and Direction become unchecked.
- Improved: When opening a file location from WFC, the file is now selected. In the
previous versions the folder was opened but the user had to select the file manually.
- Improved: Consecutive notifications are allowed for the same program only after a
period of 30 seconds between two blocked connection attempts for the same program.
Consecutive notifications are now allowed. Multiple notifications for the same program
will not be displayed because many notifications can be generated, but the info for
an already displayed notification for the same program will be updated.

Benutzeravatar
Distman
Mitglied
Beiträge: 114
Registriert: 22.12.03, 10:48

Re: Windows Firewall Control v. 4.0.9.2

Beitrag von Distman » 26.08.14, 7:29

Windows Firewall Control v.4.1.1.0

Changlog und Downloadlink hier: http://www.wilderssecurity.com/threads/ ... st-2402978

Jean
Beiträge: 11444
Registriert: 30.10.01, 12:41

Re: Windows Firewall Control v. 4.1.1.0

Beitrag von Jean » 22.11.14, 2:29

v. 4.2.0.1
- New: In Connections Log a new filter is available in the toolbox.
- New: The profile displayed in WFC is updated now even if the user changes the settings from outside of WFC
- New: The restore profile set in the Profiles tab is reverted now even if the state of Windows Firewall is modified from outside of WFC.
- New: Added a new confirmation dialog when the user switches from Main Panel to No Filtering profile.
- New: The tray icon will display a balloon tip if the profile is High Filtering at program start-up
...

Benutzeravatar
^L^
Mitglied
Beiträge: 1883
Registriert: 07.12.03, 4:54

UPDATE: Windows Firewall Control 4.4.4.0

Beitrag von ^L^ » 17.05.15, 8:14

What's new in version 4.4.4.0 (30.04.2015)

- New: A new section for configuring the advanced notifications settings was added in
the Notifications tab. The new settings can be used to tweak the notifications system
regarding the notifications that should be displayed or not.
- Updated: The notifications levels were changed back. In Medium notification level
the notifications will be displayed no matter of the folder, and the notifications
for System and svchost.exe will be skipped. The notifications for System and svchost.exe
are displayed only on High notification level.
- Updated: The inbound rules with edge traversal set to 'Defer to user' are not set as
read only anymore in WFC. Even if the update on them may not work in all cases, the user
has at least the ability to change the Group of the rule so that the rule becomes
editable in WFwAS.
- Fixed: Duplicating a rule with the port set to keywords as IPHTTPS or Ply2Disc does
not have the Duplicate word in the rule name. Also, these kind of rules can't be
edited because IPHTTPS or Ply2Disc keywords are not recognized by WFC.
- Fixed: In Windows 10, rules with local ports that use keywords are retrieved with
an extra ',' making the rules invalid when trying to edit them.
CL: http://www.binisoft.org/changelog.txt
DL: http://www.binisoft.org/wfc.php
www.woxikon.de Übersetzungen Synonyme Reime Abkürzungen 13 Sprachen | ^L^ http://www.denkforum.at/find-new/posts


BlackFly
Mitglied
Beiträge: 69
Registriert: 15.10.05, 3:23

Re: Windows Firewall Control v. 4.5.3.0

Beitrag von BlackFly » 01.03.16, 20:51

Aktuell 4.6.2.2

CL lieber selber nachlesen, das sind mittlerweile ein paar Versionen und entsprechend lang: http://www.binisoft.org/changelog.txt
Download: http://www.binisoft.org/download/wfc4setup.exe

Benutzeravatar
Gordon
Beiträge: 12841
Registriert: 06.01.02, 18:46

Re: Windows Firewall Control v. 4.6.2.2

Beitrag von Gordon » 21.08.16, 18:50

frisch erschienen bei 4.8.50
http://www.binisoft.org/changelog.txt
FCK Klimawandel

HomiSite
Mitglied
Beiträge: 92
Registriert: 12.07.07, 14:32

Windows Firewall Control v. 4.8.7.0

Beitrag von HomiSite » 29.09.16, 13:00

Wieder zwei Releases weiter bei 4.8.7.0 vom 28.09.2016, Changelog wie immer unter http://www.binisoft.org/changelog.txt

Hinweis: Ich hing noch bei Version 4.7.0.0 (29.03.2016) und hab jetzt manuell geupdatet, weil der Updater nicht mehr ging wegen: "Fixed: The IP set in the rule named "WFC - Windows Firewall Control Updater" needs to be updated to the new website IP which is now 66.198.240.5" (via Version 4.7.1.0 vom 10.04.2016, die ich natürlich nicht mehr bekam).

Benutzeravatar
jasonliul
Mitglied
Beiträge: 1387
Registriert: 15.10.16, 23:45

Re: Windows Firewall Control v. 4.8.7.0

Beitrag von jasonliul » 14.12.16, 14:16

v 4.9.0
- Updated: The notifications system was redesigned in order to allow defining
exceptions. The High notification level was removed since the new notifications
system can be configured to achieve the same results. The existing modes were
renamed.
- Fixed: In Properties dialog, the local addresses field should not accept custom
keywords like the remote addresses field since this is not allowed not even from
WFwAS.
- Fixed: In Properties dialog it is not possible to select "Services only". Opening
such a rule result in an empty selection in Services combo box.
- Fixed: Duplicate authorized group names can be added if the case is changed.
- Updated: The user manual was updated to reflect the new changes.
Fortuna fortes juvat.

Benutzeravatar
jasonliul
Mitglied
Beiträge: 1387
Registriert: 15.10.16, 23:45

Re: Windows Firewall Control v. 4.9.0

Beitrag von jasonliul » 22.12.16, 12:39

v 4.9.1.0
- New: Added "Freeze first column" option in the header context menu of Rules Panel
and Connections Log. When enabled, it will always keep the first column visible.
- Updated: When Secure Rules is set to disable unauthorized rules, WFC will
automatically disable these rules and will add the "U - " prefix to the rule name.
The group name is not changed anymore and the "Unauthorized Rules" group was removed.
- Fixed: Secure Rules delay when removing/disabling inbound rules with Edge Traversal
set to "Defer to user".
- Updated: The user manual was updated to reflect the new changes.
Fortuna fortes juvat.

Antworten